Marazzi

Marazzi is a Porcelain surface that allows architects and designers freedom for innovation with unparalleled styles and designs. The brand itself is well established since 1935 and has adapted to modern trends and requirements within the stone industry.

Marazzi material is sourced from Italy.

Marazzi worktops are available in 6mm, 12mm and 20mm.

Polished, Natural and Satin

Marazzi surfaces are ideal for installing in Bathrooms, Kitchens, Wall Cladding and more.

What you need:

• Warm water
• Neutral pH detergent (non-acidic, non-alkaline)
• Soft cloth, sponge, or microfiber towel

Steps:

1. Wipe the surface with a soft cloth or sponge dampened in warm water and neutral detergent.
2. Rinse with clean water.
3. Dry thoroughly with a microfiber cloth to prevent water spots or streaks.

Avoid common mistakes:

• ❌ Don’t use waxes or oily products (they leave a residue)
• ❌ Don’t use bleach, ammonia, or harsh chemical cleaners
• ❌ Don’t use abrasive pads for routine cleaning

‍

For wine, coffee, beer, food colourings, oil, grease:

• Use an alkaline cleaner or degreasing detergent (pH-balanced and safe for porcelain).
• Apply directly to the stain and let sit for a few minutes.
• Gently rub with a soft cloth or sponge.
• Rinse thoroughly and dry.

For metal marks, rust or limescale:

• Use a controlled-pH acid cleaner (specifically designed for porcelain stoneware).
• Dilute according to manufacturer’s instructions.
• Apply to affected area, wait briefly, and wipe clean.
• Rinse thoroughly.

Always test cleaners on a hidden area first.
Avoid abrasive sponges unless specifically needed

‍

After installation, adhesive or grout residue may remain on the worktop. Removing it properly is critical.

‍

Steps:

1. Sweep or wipe surface to remove loose dust.
2. Use a controlled-pH acid cleaner (specifically made for porcelain) to break down cement or grout residue.
3. Dilute cleaner according to manufacturer instructions.
4. Apply with a brush or soft cloth.
   → For tough deposits, use an abrasive sponge or soft rag, rubbing gently by hand.
5. Rinse thoroughly with clean water.
6. Dry completely.

‍

⚠️ Only use abrasive sponges during post-installation cleaning, and only on specific residue — never for regular cleaning.

‍

To protect your Marazzi worktop, avoid the following products and tools:

• ❌ Waxes, polishes, or oily surface treatments
• ❌ Bleach, ammonia, or high-alkaline cleaners
• ❌ Generic descalers not labeled safe for porcelain
• ❌ Metal scouring pads or steel wool
• ❌ Abrasive sponges (except for post-installation use on tough spots)

‍

Clean spills as soon as possible, especially staining agents like wine, coffee, or oil.

Use chopping boards and trivets to protect the surface from scratches or thermal shock.

Clean regularly with neutral pH cleaners.

Dry the surface after cleaning to prevent streaks or mineral build-up.

Certain substances may not be effectively removed through standard cleaning methods, requiring specific procedures based on their nature. The duration for which the substance remains on the surface is crucial, and it is recommended to clean the area promptly. By doing so, the substance is prevented from drying out, facilitating easier removal.

Acid: Acidic cleaning products: descalers, cement removers.

Alkaline: Basic cleaning products: ammonia, degreasers.

Solvent: Universal solvent, thinner, turpentine, acetone, alcohol

Oxidant: Diluted hydrogen peroxide or bleach.