Sensa Siberia Worktops

No, Sensa's treatment extends the life cycle of your worktop. No sealing is required and it is easy to clean.

Sensa is available in 20 and 30 mm thicknesses for worktops and 30 mm for panelling.

Because the product has a high absorption capacity (up to 5 mm), no treatment is usually necessary. Reapplication should only be done in extreme cases. In any event, it is recommended that a specialist carries out this task to ensure the best results.

Avoid placing very hot objects directly on the worktop. To prevent damage to the stone, it is recommended to use trivets when setting hot items on the surface.

The scratch has left a metal mark on the surface, so cleaning is necessary to remove the stain. To do this, dilute a metal cleaner with water and apply the mixture using a damp blue scouring pad, working in circular motions. Alternatively, you can use cleaning vinegar or an anti-limescale product.

The use of bleach or other harsh cleaning products is not recommended.

Yes, Sensa can be used for both flooring and wall cladding. However, please note that due to the stone�s anti-stain treatment, it may gradually wear down in high-traffic flooring areas.

Sensa cleaning and maintenance is very easy – just wash with soap and water. No further treatment is required to protect the stone.

‍

Step 1

Apply neutral soap to the affected area and gently rub in a circular motion with a damp microfiber cloth.

‍

Step 2

Leave to work for a couple of minutes. Then, with a cloth, wipe off any soap residue. Finally, dry it with kitchen roll.

‍